Power Weeder is considered the most reliable machine that serves modern agriculture. This machine enables the farmers to get rid of weeds and prepare the soil and do cultivation works with ease. Whichever model of the Agricultural Power Weeder, from Power Tiller or Mini Power Tiller to another model, unexpected shutdown of the engine in the middle of the field will waste time and decrease productivity.
Farmers tend to think that something very serious has occurred with the engine of the machine when it gets shut down suddenly. The truth is that such a problem has nothing to do with the engine itself but is due to other factors.
To save yourself and your Power Weeder Machine from additional damage, just spend some time trying to find out what caused the problem.
Let’s Understand in details –
1. Fuel Supply Is Interrupted
Without proper supply of fuel, the engine will be unable to run.
This could be due to insufficient fuel, fuel contamination, blocked fuel filter, or blocked fuel lines.
Partially blocked filters could also hinder the fuel flow and thus reduce engine power, leading to engine shut down. Before continuing with your job, check the fuel tank, fuel filter, and fuel lines. Make sure that the fuel used is clean for the efficient combustion of the engine.
2. Engine Is Overheating
The engine can experience a higher temperature due to prolonged running at heavy loads.
Running in tight soil, plowing too deep, or continuous operation without any pause can make the engine face extra load. The engine stops in case of very high temperatures in order to avoid internal damage.
Let the engine cool down by itself prior to restarting it again. It is also necessary to check the engine oil level and clean the air filter.
3. Air Filter Is Completely Blocked
These fields will produce dust, dried grass, and loose soil that get accumulated over time in the air filter.
If the flow of air gets restricted due to the accumulation of these substances, then the amount of oxygen received by the engine will decrease. Due to the lack of oxygen, the engine will lose its efficiency, and ultimately the Farming Machine will stop functioning while working.
Cleaning of the air filter after dusty work is perhaps the easiest precautionary measure.
4. Excessive Load on the Machine
There is a recommended capacity for each Power Weeder. Operating the machine in tough soil conditions that need it to cultivate tough soil in one go will put too much load on the engine and the transmission system of the machine.
In such a case, the engine will have to work at a higher capacity than its design capacity, resulting in increased fuel and engine wear and tear.
The correct way to handle this problem is to lower the cultivation depth and perform several passes if necessary.
5. Lack of Routine Maintenance
Unforeseen engine failures have mostly been reported due to maintenance negligence rather than a breakdown in machinery.
Used engine oil, dirty spark plugs, loose control cables, clogged filters, and inadequate lubrication continuously decrease the efficiency of machines. Though they might seem like small problems, they usually end up causing frequent interruptions in fieldwork.
A proper maintenance routine will help keep your Power Tiller Machine, Agriculture Tiller, Farm Tiller, Rotary Tiller, Mini Cultivator, and other Farm Equipment running smoothly during the crop cycle.
What Should You Check Before Restarting?
In case the Power Weeder Machine abruptly stops working, you should carry out a checkup before starting it again.
- Fuel levels should be checked.
- The air filter should be checked for dust and dirt.
- Engine oil levels should be checked.
- The engine should be cooled down in case of overheating.
- Loose connections should be checked.
- Any mud or crop residue tangled up on the rotating blades should be removed.
This will take only a few minutes but can save you from some serious trouble.
Preventive Maintenance Tips
Maintenance procedures will greatly enhance the effectiveness of your Agriculture Machinery.
- Change the oil according to the required time schedule.
- Clean the air filter after dusty farm operations.
- Check the spark plug and fuel filter regularly.
- Do not run the machinery at full load.
- Lubricate the moving parts as necessary.
- Park the machinery in a clean and dry place.
The efficiency of your Weeder for Farming, Tiller for Farming and other Agriculture Machinery will increase through these measures.
Final Thoughts
Just because a Power Weeder stops in the middle of the field does not mean there is something seriously wrong with the engine. More often than not, the reason for such occurrences can be associated with the fuel system, overheating, lack of air circulation, engine loading, and poor maintenance of the machine.
Through proper maintenance of the Power Weeder Machine, farmers will increase its reliability, fuel economy, and lifespan. With a reliable machine that works well in the fields, farmers can easily facilitate farm mechanization and save a lot of money during the cultivation period.
Read More: Power Weeder Handle Vibration Problem and How to Reduce It
