The Power Weeder is created for simplifying farm activities through decreasing manual labor and increasing productivity. Whatever your purpose is – whether it is weeding, soil cultivation, field preparation, or inter-cultivation – the machinery is supposed to work properly. One problem experienced by many farmers after frequent use of this machinery is handling vibration.
Apart from making the use of the equipment uncomfortable, handling vibration might also decrease working efficiency, as well as cause operator’s tiredness. If the problem is ignored for a long period of time, it might influence the other parts of the Power Weeder Machine and require additional expenses for its maintenance.
The great thing about the handle vibration is that it is usually connected with certain mechanical and operational factors, most of which can be easily detected and solved.
How Much Vibration Is Normal?
All Power Weeders and Power Tiller Machines will vibrate since both the engine and blades create a lot of motion while cultivating.
But when the handle vibrates excessively, becomes hard to hold, and causes discomfort in just a few minutes of use, it means that there is something wrong with your machinery.
It is important to solve such problems in order not to damage your Agriculture Machinery any further.
Loose Handle Fasteners
A very easy cause for excess vibration is the loose nuts and bolts that are around the handle assembly.
With all the vibrations from working in agricultural lands, the fasteners get loosened over time due to constant vibrations.Even a little bit of vibration in the handle assembly feels really strong.
Inspect all mounting bolts before starting to work.
Worn or Damaged Blades
Rotating blades are used for converting the energy into the soil. Bending, cracking, or uneven wear of blades makes the blade assembly become unbalanced.
Unbalanced Cultivator Machine results in uneven rotation that leads to vibrations being distributed along the transmission and through the handle.Check blades for damages and replace them when needed.
Operating in Uneven or Rocky Soil
Uneven or rocky soil also can be the cause of increased vibrations.
Working in rocky, hard or root-filled soil causes an increased resistance to the blades. Vibrations of the handle will become increasingly obvious as the machine meets more resistance.
Decreasing the depth of cultivation during the first run is a good way of increasing the stability of operation and saving your Soil Preparation Machine.
Engine Mounting Components Need Inspection
The engine is mounted on the frame with the help of mounting brackets and other fastening devices. The looseness of such parts causes engine movements while the machine is in use.
Any extra movements cause increased vibration transmitted to the handle of the machine, thus making it harder to operate.The regular check of the engine mounting mechanism should be part of any preventive maintenance.
Incorrect Engine Speed
Another frequent cause of extra vibration is the continuous work of the engine at the maximum possible speed.
Farmers are often convinced that extra speed guarantees extra performance. On the contrary, it results in vibrations, fuel consumption, and mechanical wearing. It is necessary to maintain constant engine speed depending on the soil condition and required depth of cultivation.
Poor Maintenance of Rotating Components
A few components play an important role in the functioning of the Power Weeder Machine.
These include the transmission system, blade assembly, shafts, bearings, and gear box.
In case of lack of lubrication and the wearing out of rotating components, vibration will slowly build up.
Maintenance of the equipment helps ensure smooth functioning.
Simple Ways to Reduce Handle Vibration
The best solution that helps prevent vibration and increase service life is routine maintenance of your Farm Equipment.
It should be done according to the following instructions:
- Tighten all mounting bolts of handles before using the tool.
- Check blades for any signs of wear or damage.
- Replace bent or broken blades immediately.
- Grease all moving parts following the maintenance plan.
- Check gearbox and transmission elements occasionally.
- Do not work at full throttle for a long time.
- Decrease cultivation depth on hard or stony soil.
- Remove all mud, grass and dirt after each use.
Such preventive actions will help enhance the performance of your Power Tiller, Mini Power Tiller, Agriculture Tiller, Farm Tiller, Mini Cultivator, Rotary Tiller and other Agriculture Equipment making the work easier for you.
Can Handle Vibration Affect Machine Performance?
Yes. Over-vibration does more than just cause discomfort to the operator.
Over time, it loosens the fasteners, increases bearing and transmission wear, reduces cultivation accuracy, and decreases the useful life of the machine parts. Machines working under over-vibration need maintenance more frequently than machines that are well-balanced.
Taking care of the over-vibration problem early in time will always be much cheaper than dealing with the results of a long-lasting problem.
Final Thoughts
There is supposed to be some degree of vibration during operation of the Power Weeder, but vibration of the handle must never be ignored. Loose fastenings, blade damage, neglect in maintenance, fast engine revolutions, and unfavorable field conditions are just some of the possible causes for this problem.
Routine checking, proper maintenance, and proper use will ensure that your Power Weeder Machine, Weeder for Farming, Tiller for Farming, and all of your other Farm Mechanization machinery will remain efficient and functional. Properly maintained machinery is guaranteed to provide you with smoother performance, higher efficiency, less fatigue, and increased longevity of the machine.
Read More: Power Weeder Gear Problem: Why Gear Shifting Becomes Hard
